Current Converter
Step current between milliamps, amps and kiloamps
- 100% Free
- Files stay private
- Works in your browser
1 Ampere (A) =
1000
Milliampere (mA)
Relative size of each number
Quick referenceA → mA
All unitsfor 1 Ampere (A)
| Unit | Value | Copy |
|---|---|---|
| 1 | ||
| 1000 | ||
| 0.001 |
Electric current. The base unit is the ampere (A). Values convert live in your browser.
How it works
Type a current value
Type a number in the Value box, then pick Ampere, Milliampere or Kiloampere in the From and To menus.
Read the live result
The highlighted result updates as you type, with a conversion line under it such as 1 A = 1000 mA.
Copy the result
Press Copy result to copy the number, or check the All units table for your value in all three units.
Convert electric current between amperes, milliamperes and kiloamperes instantly, right in your browser. Type a value and every equivalent updates live, with no submit button and no data ever leaving your device.
What is Current Converter?
Current Converter is a free tool that translates electric current from one SI unit to another using the ampere (A) as its base. Electric current measures the rate of charge flow through a circuit, and because real projects hop between microscopic sensor readings and heavy industrial loads, you constantly need to move between milliamperes, amperes and kiloamperes. This tool does that math for you accurately and immediately.
Who Benefits from This Tool
- Electronics hobbyists: reading datasheets that list draw in mA while your supply is rated in A.
- Electrical engineers: scaling between bench-level currents and kiloampere fault or busbar figures.
- Students and educators: checking homework and lab results without hand-calculating powers of ten.
- Technicians and electricians: matching meter readings to component and breaker specifications on site.
- PCB and firmware developers: budgeting current for MCUs, LEDs and sensors quoted in milliamperes.
Key Features
- Live conversion: results recalculate as you type, with no submit step.
- Three core units: ampere, milliampere and kiloampere, routed through the ampere base.
- Precision control: choose 4, 6, 8 or maximum significant figures for the output.
- Instant swap: flip the From and To units with a single click.
- All-units table: see your value expressed in every supported unit at once.
- Quick-reference chart: preset values (1, 2, 5, 10, 25, 50, 100) converted automatically.
- Local history: recent conversions are saved in your browser for quick reuse.
How to Use
- Enter the current value you want to convert in the input field.
- Pick the unit you are converting from (for example, milliampere).
- Pick the unit you are converting to (for example, ampere), or click swap to reverse them.
- Read the live result and, if needed, adjust the precision selector.
- Copy the answer or check the all-units table for every equivalent at once.
Common Use Cases
- Converting a sensor's 20 mA output into amperes for a control-loop calculation.
- Sizing a power supply when components are rated in milliamperes but the rail total is in amperes.
- Expressing a large substation or short-circuit current in kiloamperes for documentation.
- Comparing battery discharge current specs quoted in different units.
- Verifying multimeter readings against a datasheet before ordering parts.
Tips and Best Practices
- Use the swap button instead of retyping when you realise the direction is reversed.
- Raise precision to 8 or Max when small milliampere differences matter for accuracy.
- Remember 1 A equals 1000 mA and 1 kA equals 1000 A, so the tool only ever shifts the decimal.
- Keep an eye on the all-units table to catch order-of-magnitude mistakes at a glance.
- Current is not the same as power; convert current here, then combine with voltage separately.
Limitations and Notes
This converter runs entirely in your browser, so nothing you enter is uploaded or stored on a server. It performs linear SI-prefix conversions between ampere, milliampere and kiloampere, and does not model AC waveforms, phase, RMS versus peak values, or safety limits. Displayed results are rounded to the significant figures you select, so very large or very small numbers may appear in exponential notation. Always confirm critical electrical calculations against manufacturer specifications and applicable codes.
FAQs
There are exactly 1000 milliamperes (mA) in one ampere (A). Converting from A to mA simply multiplies the value by 1000.
The ampere (A) is the base unit. Every value is routed through amperes before being expressed in your chosen target unit, which keeps the conversions consistent.
No. It converts the numeric magnitude between units only. It does not distinguish between AC and DC, or between RMS, peak and average current, so apply those concepts yourself before or after conversion.
No. All calculations happen locally in your browser. Nothing you type is transmitted or saved to a server, though recent conversions may be stored in your own browser for convenience.
For very large or very small magnitudes the tool uses compact exponential notation so the figure stays readable. You can adjust the precision selector to change how many significant figures appear.
Yes. Select kiloampere as the From unit and milliampere as the To unit; the converter routes through the ampere base, giving a factor of one million between them.