Volumetric Flow Rate Converter
Flow rate across 28 per second and per minute units
- 100% Free
- Files stay private
- Works in your browser
1 Cubic meters per second (m³/s) =
1000
Liters per second (L/s)
Relative size of each number
Quick referencem³/s → L/s
All unitsfor 1 Cubic meters per second (m³/s)
| Unit | Value | Copy |
|---|---|---|
| 1e-9 | ||
| 1 | ||
| 1000 | ||
| 1000000 | ||
| 1000000000 | ||
| 61023.7 | ||
| 35.31 | ||
| 264.17 | ||
| 219.97 | ||
| 1000 | ||
| 2.39913e-10 | ||
| 0.000810713 | ||
| 28.38 | ||
| 27.5 | ||
| 6e-8 | ||
| 60 | ||
| 60000 | ||
| 60000000 | ||
| 59999999880 | ||
| 3661420 | ||
| 2118.88 | ||
| 15850.3 | ||
| 13198.1 | ||
| 60000 | ||
| 1.43948e-8 | ||
| 0.0486428 | ||
| 1702.66 | ||
| 1649.77 |
Type any value and pick your units. Every conversion updates live in your browser.
How it works
Enter a flow rate
Type a number in the Value field, then choose From and To units such as Liters per minute or Gallons per second (US liquid).
Check the conversion
The highlighted result updates as you type, with a line beneath it giving the factor between the two flow units.
Copy or compare units
Press Copy result, or use the All units table to see the same flow in every per-second and per-minute unit.
Convert volumetric flow rate between cubic meters per second, liters per minute, gallons per minute, cubic feet per minute and many more, live as you type. Pick your units, set the precision, and copy a clean answer in one click.
What is Volumetric Flow Rate Converter?
Volumetric Flow Rate Converter is a free browser tool that translates a flow rate, a volume moving per unit of time, from one unit into another. Every unit is defined relative to cubic meters per second, so conversions route through a single reference and stay consistent across metric and imperial systems. It matters because pumps, HVAC systems and plumbing are rated in a jumble of units like GPM, CFM and L/s, and converting between them accurately is essential for correct sizing.
Who Benefits from This Tool
- Mechanical and HVAC engineers: size ductwork and fans across CFM and cubic meters per second.
- Plumbers and pump specialists: reconcile GPM with liters per minute or second.
- Process and chemical engineers: convert throughput between metric and imperial flow units.
- Water and irrigation planners: work with liters, gallons and cubic meters per unit time.
- Students and educators: practice fluid-mechanics conversions with instant feedback.
- Technicians and estimators: match equipment specs quoted in unfamiliar units.
Key Features
- Broad unit set: cubic meters, decimeters, centimeters and millimeters, plus inches, feet, miles, gallons (US and Imperial), liters, acre-feet and bushels, per second and per minute.
- SI-based conversion: every value routes through cubic meters per second for consistency.
- Live updates: results recalculate as you type or change a unit.
- Formula line: shows the exact factor between your two chosen units.
- Adjustable precision: 4, 6, 8 or maximum significant figures.
- Searchable selectors: jump to a unit fast within the long list.
- All-units table and local history: see every unit at once and reuse recent conversions.
How to Use
- Type the flow rate into the Value field. Decimals are supported.
- Choose the unit you are converting From (defaults to cubic meters per second).
- Choose the unit you are converting To (defaults to liters per second), or press swap to flip them.
- Read the highlighted result and adjust precision for more or fewer figures.
- Copy the answer, or tap a quick-reference value to convert a common number.
Common Use Cases
- Converting an HVAC airflow from cubic meters per second to cubic feet per minute.
- Turning a pump rating in gallons per minute into liters per second.
- Reconciling a US-gallon flow with an Imperial-gallon spec.
- Expressing an irrigation flow in liters per minute.
- Checking a process throughput given in cubic meters per minute.
- Comparing a fan spec quoted in CFM against a metric datasheet.
Tips and Best Practices
- Distinguish US gallons from Imperial gallons. The tool lists both, and they are not interchangeable.
- Watch the per-second versus per-minute basis, since it changes the result by a factor of sixty.
- Use the searchable dropdown to find a specific unit rather than scrolling the long list.
- Raise precision when converting between units that differ by many orders of magnitude.
- Use the all-units table to sanity-check the order of magnitude before trusting a single figure.
- Tap a row in the table to set that unit as the target instantly.
Limitations and Notes
This tool converts volumetric flow rate (volume per time) and does not convert mass flow rate, which depends on fluid density. If you need mass flow, apply the density separately. Conversion factors are ported from the reference data and rounded, so a result can differ marginally from other published tables. Everything runs entirely in your browser. Nothing you enter is uploaded, and your history is stored only on your own device. Results are rounded to the significant figures you select, and very large or small values may display in exponential notation, so raise precision when you need more detail.
FAQs
Cubic kilometers, meters, decimeters, centimeters, millimeters, inches, feet and miles per second and per minute, plus liters, US and Imperial gallons, acre-feet and US and Imperial bushels per second and per minute.
Set From to cubic feet per minute and To to cubic meters per second, then enter your value. The tool applies the exact factor and updates live.
They are different volumes (an Imperial gallon is larger than a US gallon), so the tool lists each separately. Pick the one your source uses.
No. It handles volumetric flow only. To get mass flow, multiply the volumetric result by the fluid's density yourself.
They are separated by a factor of sixty. Be sure you select the correct time basis, or the result will be off by that factor.
No. All calculations run locally in your browser, and your recent history stays on your own device.