Illuminance Converter
Lux, foot-candles, phot and other light level units
- 100% Free
- Files stay private
- Works in your browser
1 Lux (lx) =
0.092903
Foot-candle (fc)
Relative size of each number
Quick referencelx → fc
All unitsfor 1 Lux (lx)
| Unit | Value | Copy |
|---|---|---|
| 1000000 | ||
| 1000 | ||
| 1 | ||
| 0.001 | ||
| 1 | ||
| 0.0001 | ||
| 0.092903 | ||
| 0.0001 | ||
| 1000 |
Type any value and pick your units. Every conversion updates live in your browser.
How it works
Enter a light level
Type a number in the Value box, then pick From and To units such as Lux (lx) or Foot-candle (fc).
Read the live result
The converted reading updates as you type, with a factor line such as 1 lx = 0.092903 fc. Precision sets the significant figures of decimals.
Copy or scan units
Press Copy result, or scan the All units table to see your reading in every unit, from Microlux (µlx) to Nox.
Convert illuminance between lux, foot-candles, phot, lumen per square meter and more, live as you type. Pick your units, set the precision, and copy a clean answer in one click.
What is Illuminance Converter?
Illuminance Converter is a free browser tool that translates a light-level reading from one unit into another. Illuminance measures how much luminous flux lands on a surface, and every unit here is defined relative to the lux, so conversions route through a single reference and stay consistent. It matters because lighting is specified in lux in most of the world but in foot-candles in the US, and scientific work sometimes uses phot, so cross-checking a value quickly avoids costly design mistakes.
Who Benefits from This Tool
- Lighting designers: reconcile lux-based specs with foot-candle requirements.
- Architects and interior planners: verify light levels against building codes.
- Photographers and videographers: translate meter readings between units.
- Electrical and facilities engineers: check workspace illumination targets.
- Students and educators: explore photometric units with instant feedback.
- Horticulture and growers: compare light-level figures across sources.
Key Features
- Nine units: microlux, millilux, lux, kilolux, lumen per square meter, lumen per square centimeter, foot-candle, phot and nox.
- Lux-based conversion: every value routes through the SI base for consistency.
- Live updates: results recalculate as you type or change a unit.
- Formula line: shows the exact factor between the two chosen units.
- Adjustable precision: 4, 6, 8 or maximum significant figures.
- All-units table: your value expressed across every unit at once.
- Copy and local history: grab the answer and reuse recent conversions.
How to Use
- Type the light level into the Value field. Decimals are supported.
- Choose the unit you are converting From (defaults to lux).
- Choose the unit you are converting To (defaults to foot-candle), or press swap to flip them.
- Read the highlighted result and adjust precision for more or fewer figures.
- Copy the answer, or tap a quick-reference value to convert a common number.
Common Use Cases
- Converting a 500 lux office target into foot-candles for a US spec.
- Turning a foot-candle reading from a light meter back into lux.
- Comparing a code requirement stated in lux against a measured value.
- Expressing bright outdoor light in kilolux.
- Checking a scientific reading given in phot.
- Normalizing lighting data that mixes lux and lumen per square meter.
Tips and Best Practices
- Remember that lux and lumen per square meter are the same unit, so converting between them leaves the number unchanged.
- Keep in mind that roughly 10.76 lux equal 1 foot-candle when doing a quick mental check.
- Use the all-units table to confirm the order of magnitude before trusting a single result.
- Raise precision for scientific or design work where small differences matter.
- Tap a row in the table to set that unit as the target without scrolling the dropdown.
- Measure at the working surface, since illuminance drops sharply as distance from the source increases.
Limitations and Notes
Illuminance describes light falling on a surface and is distinct from luminance (brightness of a source) or luminous intensity, which this tool does not convert. The foot-candle factor used here follows the reference data and is rounded, so a converted value can differ slightly from other published conversions. Everything runs entirely in your browser. Nothing you enter is uploaded, and your history is stored only on your own device. Results are rounded to the significant figures you select, so raise the precision when you need more decimals.
FAQs
Microlux, millilux, lux, kilolux, lumen per square meter, lumen per square centimeter, foot-candle, phot and nox.
Enter your value with From on lux and To on foot-candle. As a rough guide, dividing lux by about 10.76 gives foot-candles.
Yes. One lux is defined as one lumen per square meter, so converting between them does not change the number.
A phot is a CGS unit of illuminance equal to 10,000 lux (one lumen per square centimeter). It appears mainly in older or scientific literature.
No. It measures illuminance (light arriving on a surface), not the luminance or intensity of the source itself.
No. All conversions run locally in your browser, and your recent history stays on your own device.